|Ferrule Endface::||UPC/APC||Connector Type::||SC Type|
|Cable Length:||1/1.5/3/5/10/20m Or Custom||Catagory:||Fiber Optic Patch Cord|
|Cable Outer Diameter::||0.9/2.0/3.0mm||Model Name:||Multimode Duplex Fiber Optic Patch Cord Jumper|
fiber optic jumper cables,
single mode patch cord
Both ends of the optical fiber patch cord transceiver module wavelength must be consistent, that is to say the two ends of the optical fibre optical module must be the same wavelength, the simple discrimination method is the light module to the colour line.
|Pigtail Connector||PC (SM)||UPC (SM)||APC (SM)||MM|
|Return Loss (dB)||≥45||≥50||≥60||≥35|
|Insertion Loss (dB)||≤0.2 (max≤0.3)|
|Operation Temperature (°C)||-25~+70|
|Tensile Strength (N)||≥90 (Φ3.0), ≥70 (Φ2.0), Φ0.9|
|diameter||0.9mm 2.0mm, 3.0mm etc|
|Cable material||PVC, LSZH|
Simplex, duplex, 4cores, 6cores, 8cores, 12cores etc
The fiber optic patch cord mainly used on patch panel or for the connection between outlets and terminal equipment.It also widely used for high bit rate data transmission,telecommunications,tesing instruments,active device terminations,LAN/WAN and FTTX.
Optical fiber in use not excessive bending and winding, this will increase the light attenuation in the transmission process. Fiber jumper after use must use to protect the optical fiber attachment, dust and oil will damage the fiber coupling.
This high precision, ceramic ferrule connector is equipped with an anti rotation key, reducing fiber endface damage and rotational alignment sensitivity of the fiber.
The key is also used for repeatable alignment of fibers in the optimal, minimal loss position. Multimode versions of this connector are also available.
If the fiber optic connector is dirty, you can use a cotton swab dipped in alcohol cleaning, otherwise it will affect the quality of communications.
Multimedia; Premise installations; Local area networks; FTTH FTTX applications; CATV.
Contact Person: sales