|KFRP Strength Member For Optic Cable:||Body ±0.05 Mm||Minimum Bending Property:||10Dending Diameter:10D, Surface With No Bur, Cracks And Break|
|10Dending Diameter:10D, Surface With No Bur, Cracks And Break:||Bending Diameter:30D, Surface With No Bur, Cracks And Break||Low Temperature Bending Test （－40℃，24h）:||Surface With No Bur, Cracks And Break|
|KFRP With Coating:||It Only Considers The Diameter Tolerancea And Non-circularity Of Coating.||D Represents:||The Body Of KFRP Itself.|
|Bending Life:||Bending Life Of Material Is To Research.||Specification 1:||Φ0.40mm Φ0.50mm×Φ0.58mm|
|Specification 2:||Φ0.45mm Φ0.62mm×Φ0.68mm|
military fiber optic cable,
tactical optical fiber cable
KFRP strength member KFRP rod, KFRP strength member, KFRP reinforced core.
Light weight and high strength: KFRP has the characteristics of low density and high strength. Its ratio of strength and modulus are higher than those of steel wire and GFRP.
KFRP has a lower coefficient of thermal expansion than steel wire and GFRP in a wide range of temperature;
Impact and break resistance: KFRP has much higher tensile strength (≥1600Mpa).
Even it is broken, the remained tensile strength could be 1300Mpa.
KFRP is flexible and easy to be bent. Its minimum bending diameter is 24 times of the diameter of KFRP rod.
Good aesthetic and flexible, especially for the indoor layout.
Contact Person: Sunny Huang
Tel: +86-180 4690 2377