|Type:||Horizontal Fiber Optic Splice Closure||Material:||Plastic PC|
|Insulation Resisitance:||≥2x104MΩ||Diameter Of Fiber:||Φ16mm Φ20mm Φ23mm|
|Color:||Black||Panel Type::||12-24 Cores|
outdoor fiber termination box,
ftth fiber optic termination box
Horizontal Fiber optic splice closure is suitable for single core and ribbon fiber,
they are installed on wall ,direct-buried ,aerial ,pipelined .
The housing of box is made of high-grade PC plastic, the tray is made of ABS plastic ,these material to ensure the lifetime.
We use speical rubber to seal the cover ,which not only ensure the sealing proformance ,but also increases the oxidation resistance ,it completely reaches the repetition sealing requirements and realized the repetition use of the products.
The installation accessories provided:sealing tape 1pc,pvc insulation tape 1pc,splice pipe ,nylon tie 4pcs,plastic spanner 1pc,sticker,hanging hook 2pcs,wrench 1pc
Main technical Indexes:
Seal performance : the pressure in the closure is 100Kpa,put the closure into the water for 15minutes,there is no air bubble ,and observed it for 24 hours ,there is no change of air pressure
Re-entry performance:after 3 times of normal operations ,it can still be up to the seal performance standard Insulation resisitance: ≥2x104MΩ
Withstand voltage strength :there is no puncture and no arc-cover after the function of 15KVDC/1min.
|Model||Dimension (MM)||G.W./N.W(kg)||Material||Inlet/Outlet||Diameter of fiber cable||Capacity||Dimension /CTN (cm)|
|QYS202||400*180*85||2.9/2.4||PC||3inlets and 3outlets||Φ16mm Φ20mm Φ23mm||Bunchy:12-24(cores) Ribbon :Max 48(cores)|
Contact Person: Sunny Huang