|Ferrule Endface::||UPC/PC||Connector Type::||ST SC FC LC MTRJ E2000 MU SMA DIN|
|Cable Length:||1/5/15/20/30m Or Custom||Catagory:||SMA Fiber Optic Patch Cord|
|Cable Outer Diameter::||0.9/2.0/3.0mm||Model Name:||0.9 2.0 3.0mm ST SC FC LC MTRJ E2000 MU SMA DIN Fber Optic Patch Cord|
fiber optic jumper cables,
fiber optic patch cables
A patch cord is a fiber optic cable used to attach one device to another for signal routing.Normally, there are 4 types connector: FC/SC/LC/ST.. 3types ferrule: PC, UPC, APC…
FC stands for Fixed Connection. It is fixed by way of threaded barrel housing. FC connectors are generally constructed with a metal housing and are nickel-plated.
SC stands for Subscriber Connector- a general purpose push/pull style connector. It is a square, snap-in connector latches with a simple push-pull motion and is keyed.
LC patch cord is a fiber optic cable used to attach one device to another for signal routing. LC stands for Lucent Connector. It is a small form-factor fiber optic connector, half the size of the SC.
ST stands for Straight Tip- a quick release bayonet style connector. ST connectors are cylindrical with twist lock coupling. They are push-in and twist types
PC stands for Physical Contact.With the PC connector, the two fibers meet as they do with the flat connector, but the end faces are polished to be slightly curved or spherical. This eliminates the air gap and forces the fibers into contact
UPC stands for Ultra Physical Contact.The end faces are given an extended polishing for a better surface finish. These connectors are often used in digital, CATV, and telephony systems.
APC stands for Angled Physical Contact The end faces are still curved, but they’re angled at an industry-standard eight degrees. This maintains a tight connection. These connectors are preferred for CATV and analogue systems.
|Item||Unit||LC/SC/FC/ST Fiber Patch Cord|
According to the optical fiber jumper transmission media can be divided into different common silica fiber single-mode and multimode jumpers, and other such as the plastic optical fiber jumper as transmission medium; according to the joint structure can be divided into: FC, SC, ST jumper jumper jumper jumper, LC, MTRJ, MPO, MU jumper jumper jumper jumper, SMA, FDDI, E2000, DIN4 jumper jumper jumper jumper, D4 and so on in various forms.
The fiber optic patch cord mainly used on patch panel or for the connection between outlets and terminal equipment.It also widely used for high bit rate data transmission,telecommunications,tesing instruments,active device terminations,LAN/WAN and FTTX.
---High temperature stability
---Low insertion loss and back reflection loss
---Superior Quality Standard PC/UPC/APC Polishing
---Standard: Telcordia GR-326-CORE, TIA/EIA and IEC
Gigabit Ethernet; Active device termination; Telecommunication networks; Video;
Multimedia; Premise installations; Local area networks; FTTH FTTX applications; CATV.
Contact Person: Sunny Huang